Cut your Maintenance Costs ! The optimum lubrification technique Extend bearing life & Improve Seal performance !

GREASE MAX® requires a minimum of approximately 8 hours for a type 1 unit to approximately 40 hours for a type 12 unit to develop sufficient internal pressure to commence discharging lubricant. This period is normally not a problem for well maintained bearings however if lubrification is required in less than the start up period then activate GreaseMax in advance. GREASE MAX® has NO INTERNAL PRESSURE prior to activation. Pressure is developed, and the lubricant discharge pressure is virtually in equilibrium with bearing or grease line resistance. The chemical reaction is so designed as to give a CONSTANT rate of reaction, over the whole life of the unit. This results in a CONSTANT lubricant output. The GREASE MAX® discharge rate is not affected by bearing or seal condition, movement, vibration, etc. It is often assumed that GREASE MAX® has some sort of pre-loaded internal pressure. This is NOT the case. If it were, GREASE MAX® could not operate as a truly self regulating automatic lubricator as it would then rely on bearing and line resistance to control its operation.

Grease Max® advantages: safe, robust and reliable clean and environmentally friendly fully automatic easy mounting minimum wear prevents damage eliminates down-time cost effective

Grease Max® installed at a Quarry

Grease Max® installed at a Purification plant	Typical applications of Grease Max® Food and beverage industry Transport, shipping and ports Water and sewerage plants Lifts and elevators Machine and equipement manufacturing Printing Mining and energy Process engineering Building services and many more
Grease Max® installed at a Mineral water plan